Installation Guide
INGENIA MOTION CONTROL
Confidential and proprietary information.
Unauthorized Copies Prohibited.
Page
of
220
307
For these inputs work as single ended, tie HS_GPIx- to GND, and connect the input signal to the positive input.
and inputs are in HIGH state by defect.
Jupiter Inputs and outputs are not isolated. The ground of the Jupiter Servo Drive and the ground of the devices connected to I/Os must be the same.
Otherwise inputs or outputs may be damaged.
For a high speed signal connection (such as
) to these inputs, refer to next figure (HS_GPI2 can also be used):
