Installation Guide
INGENIA MOTION CONTROL
Confidential and proprietary information.
Unauthorized Copies Prohibited.
Page
of
28
307
Assembly recommendations for best heat dissipation
Always allow natural air convection by ensuring ≥ 10 mm air space around the drive.
Place the Jupiter in vertical position.
If housed, use a good thermal conductivity material such as black anodized aluminum. Placing the driver in a small plastic package will definitively
reduce its temperature range.
Temperature range can be increased by providing forced cooling with a fan or by placing a thermal gap pad on top of the board. Always ensure
electrical isolation between live parts and the heatsink.
TYPICALLY The jupiter without cold plate is suitable when power dissipation is < 13 W. This indicates that the maximum current it can withstand at 50 ºC is 20 A at
80 V bus voltage.
