Installation Guide
INGENIA MOTION CONTROL
Confidential and proprietary information.
Unauthorized Copies Prohibited.
Page
of
200
307
Hall sensors wiring must be electrically isolated from motor, AC power and any other power wiring.
Analog input feedback / Potentiometer
The Jupiter can use an analog signal as position and velocity feedback element. In this case, rotor position or velocity is calculated depending on the voltage level of
one analog input. There are 2 analog inputs with different input voltage range. Both can be used as position or velocity feedback input (selected via software). Next
table summarizes main features of these analog inputs:
Specification
Value
Number of inputs
2
