Installation Guide
INGENIA MOTION CONTROL
Confidential and proprietary information.
Unauthorized Copies Prohibited.
Page
of
197
307
Due to inherent low resolution of motor mounted hall sensors, using hall sensors for velocity feedback is not recommended for low speed applications.
Halls wiring should be physically isolated from motor, AC power and all other power wiring.
Analog Halls interface
The Jupiter Servo Drive can operate with analog Hall sensors (also known as linear halls) as feedback option. Signals provided by these sensors are typically 5 V
peak-to-peak sinusoidal signals, with 2.5 V offset and a phase shift of 120 degrees. These sensors can be used for a fine positioning of the rotor. Jupiter analog
halls inputs main features are shown in next table:
Specification
Value
