manualshive.com logo in svg

INGENIA Jupiter JUP-15/130, Installation Manual

The INGENIA Jupiter JUP-15/130 is a top-of-the-line audio speaker system designed to deliver unparalleled sound quality. For hassle-free setup, make sure to download the user-friendly Installation Manual from our website. It's easily accessible, free to download, and provides step-by-step instructions for optimal performance. Enhance your audio experience effortlessly with just a few clicks!

Share
Download
background image

Installation Guide

INGENIA MOTION CONTROL

Confidential and proprietary information.

Unauthorized Copies Prohibited.

Page 

 of 

139

307

Phase name

Alphabetic

Numeric

UVW

PH_A

A

1

U

PH_B

B

2

V

PH_C

C

3

W

8.2.7 DC motors and voice coil actuators

DC motors and voice coil actuators are connected to phase A and phase B connections. Phase C output is left unconnected.

Use a motor choke with 2 turns of the phase wires.

Summary of Contents for Jupiter JUP-15/130




















































































































































































































































































































Reviews:

No comments

Related manuals for Jupiter JUP-15/130

FujiFilm FRENIC HVAC Series Quick Start Manual preview
FRENIC HVAC Series
Brand: FujiFilm Pages: 20
Jesco DL-PS/24-JB-OD-S Series Installation Instructions preview
DL-PS/24-JB-OD-S Series
Brand: Jesco Pages: 2
Nord Drivesystems BU 0500 User Manual preview
BU 0500
Brand: Nord Drivesystems Pages: 212
Leadshine MX4660 Hardware Installation Manual preview
MX4660
Brand: Leadshine Pages: 28
Leadshine ACS606 User Manual preview
ACS606
Brand: Leadshine Pages: 31
Leadshine EM556-CAN User Manual preview
EM556-CAN
Brand: Leadshine Pages: 33
Eaton M-Max series User Manual preview
M-Max series
Brand: Eaton Pages: 204
ZIEHL-ABEGG Fcontrol FKDMxx-C Series Operating Instructions Manual preview
Fcontrol FKDMxx-C Series
Brand: ZIEHL-ABEGG Pages: 74
Unitek Classic Q3 400 Series Manual preview
Classic Q3 400 Series
Brand: Unitek Pages: 32
LinMot 0150-5590 Installation Manual preview
0150-5590
Brand: LinMot Pages: 29
Faulhaber 3242 BX4 Series Instruction Manual preview
3242 BX4 Series
Brand: Faulhaber Pages: 52
Binks QS-5001-1 Service Manual preview
QS-5001-1
Brand: Binks Pages: 16
OSS OSS-PCIe4-ADPT-x8-M.2-4 User Manual preview
OSS-PCIe4-ADPT-x8-M.2-4
Brand: OSS Pages: 38
Fagor DDS Hardware Manual preview
DDS
Brand: Fagor Pages: 386
ABB ACS 600 Hardware Manual preview
ACS 600
Brand: ABB Pages: 52
OEM PDD-300 User Manual preview
PDD-300
Brand: OEM Pages: 15
Xinje DP-708 User Manual preview
DP-708
Brand: Xinje Pages: 23
Danfoss AKD 2800 Quick Setup Manual preview
AKD 2800
Brand: Danfoss Pages: 77

Brands by name

Popular brands

Load more brands