EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
•
Sensors and presence detection circuits
NOTE:
When temperature exceeds a preset threshold, the controller’s
charger circuits will stop charging. You will then receive a
message that reads “Thermal Shutdown/Enter Sleep Mode.”
When the temperature falls back within normal range, the battery
will resume charging.
3.4 I
2
C
The operating status of PSU and cooling fan modules are collected
through an I
2
C serial bus. If either of these modules fails, the failure
will be detected and you will be notified through the various methods
described above.
3-12
