EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
Step 2.
Disconnect all cables
from the failed controller module.
These may include the Ethernet cables connected to the
network, and any cable connected to the RS-232C
audio jack connector.
Step 3.
Remove the screws
that secure the ejection levers to
the chassis. (See
Figure 5-1
)
Figure 5-1: Removing the Controller Retention Screws
Step 4.
Remove the controller module
by pressing down the
two (2) levers simultaneously. The controller module will
automatically ease out of the controller module bay.
Place the controller module on the clean, static-free
work pad or container previously prepared. (See
Figure
5-2
)
5-4
