EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
Figure 2-10: Fitting Enclosure Support Brackets
Step 3.
Determine the position where the subsystem is going to
be installed on the rack. Attach four (4) M5 cage nuts to
both of the front rack posts and two (2) to both of the rear
rack posts. The two cage nuts on the rear rack posts
should be aligned with the middle two cage nuts on the
front rack posts. (See
Figure 2-11
)
Figure 2-11: Attaching Cage Nuts
Step 4.
Align the screw holes on the support brackets with the
cage nuts on the rack posts. Place the bracket into the
rack and slide the brackets to adjust them to the length
between rack posts as shown in
Figure 2-12
.
2-14
