EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
5.6.2
Cooling Module Replacement Procedure
WARNING!
․
The fan replacement process should be completed within five (5)
minutes. If the process takes too long, the accumulated heat can
damage the subsystem.
․
Keep a failed module in its bay until a replacement unit is in hand.
5.6.2.1 Replacing a Cooling Module on S12E-R1132-4
To replace a cooling module, follow the steps below:
Step 1.
Remove the PSU module that contains defective
cooling fans
. Please refer to
Section
5.5.2, Step 1-4
for how to remove a PSU.
Step 2.
Use a small-size Phillips screwdriver to remove the
six securing screws of cooling modules
from the top.
(See
Figure 5-22
)
Figure 5-22: Removing the Cooling Module on S12E-R1132-4
5-22
