Chapter 5: Subsystem Maintenance and Upgrading
Figure 5-2: Removing Controller
Step 5.
Install the replacement controller
. Make sure the
ejection levers are at its lowest position. Align the
controller module with the controller module bay. Gently
slide the controller module in. Carefully push the
controller until you feel the contact resistance when the
back-end connectors are engaging the backplane. (See
Figure 5-3
)
Figure 5-3: Installing the Controller Module
Step 6.
When the controller is fully inserted, pull the lever
upward to secure the controller into chassis. (See
Figure 5-4
)
5-5
