EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
module slot. Feel the contact resistance and use slightly more
pressure to ensure the module connectors are correctly mated. If
the module comes with ejection levers or retention screws, use
them to secure the module.
1.3 Subsystem
Components
The S12E houses many active components and most of them can be
accessed through either the front or the rear panel. The modular
design of the components facilitates their easy installation and
removal. Hot-swap mechanisms are incorporated to eliminate power
surges and signal glitches that might occur while removing or
installing these modules.
1.3.1
LCD Keypad Panel
Figure 1-6: LCD Keypad Panel
The LCD panel (See
Figure 1-6
) consists of a 16 characters x 2 rows
LCD screen with push buttons, a mute button, and LED status
indicators. The LCD front panel provides full access to all
configuration and monitoring options.
Figure 1-7: Forearm Handle Retention Latches
To access drive bays in the left- or right-hand side column, first
release the retention latches by pushing them outwards (See
Figure
1-7
), and then swing the forearm handles to the sides. To close the
handles (see
Figure 1-8
)
,
swing the forearm handles towards the
1-6
