EonStor DS S12/S16/S24 Series Hardware Manual
Removing the PSU Module
WARNING!
When a PSU is removed form the chassis, the cooling module is also
removed from the chassis. Hence the airflow provided by the cooling module
is also disabled. With an empty module bay, airflow will also be disrupted. It is
therefore recommended the replacement procedure is completed in less
than five (5) minutes to prevent the system from overheating.
Step 5.
Install the replacement module
. Make sure the extraction
handle is held at its lowest position so that the saddle notches
on the sides of the handle can snap onto the metal anchor pins
on the interior walls of the PSU slot. Push the PSU into chassis,
and when you feel the contact resistance, pull the handle
upwards to secure the module.
137
