906-0731-04 Rev. B Sept. 2012
Page 60 of 68
Selector Knob Kit 712-0731-19 / 392-0066-00
Contents:
Instructions:
STEP NO.
DIRECTIONS
(For Eagle II go to step no. 12)
1
Loosen but do not remove the
(4) 8-32 X 3 screws on the outer air intake.
2
Loosen and remove the (2) 10-32 Keps nuts
and the (4) 6-32 X 2 screws. Remove the
back case by lifting from the ventilator.
3
Remove the (2) 4-40 X ¼ screws on the
Dovetail Mounting Bracket and disconnect
the ribbon cable on the PIM PCB by
simultaneously applying pressure on the
two locking “ears”.
4
Flip the ventilator over and remove the
front case assembly by lifting it straight up
away from the ventilator module.
5
Remove the bezel from the membrane
panel assembly by loosening and removing
the (7) 4-40 X ¼ screws that hold the bezel
to the front case.
ITEM
QTY
DESCRIPTION
1
Selector Knob with label
