![background image](http://html1.mh-extra.com/html/imagine/neo-nsm-7x2aes/neo-nsm-7x2aes_installation-and-operation-manual_2045416083.webp)
70
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Appendix B: Resource Module X-Y Network Communication
Crosspoint Preset
This
command is used to preset crosspoint requests for execution at a
later time. Each
Crosspoint Preset
specification includes one or more
levels, a destination, and a source. Multiple levels may be preset in a
single
Crosspoint Preset
command.
Command
Command syntax is as follows:
@ P:<Lvls>/<Dest>,<Src>[/<Dest>,<Src>...][:I<ID>]
Table B-7. Crosspoint Preset
Command Syntax
Command Syntax
Element
Syntax Format Description
Header
@
@ followed by a space ( ) indicates
pass-through commands
Command
P:
Crosspoint Preset
command
Parameters
<Lvls>/
A list of one or more single digit
level numbers (in hex; valid level
numbers= 0–9, A–F). Multiple levels
can be specified by concatenating
multiple level numbers before
ending the list of levels with the “/”
character (e.g., 0124
/
specifies levels
0, 1, 2, and 4)
<Dest>,
Hexadecimal number representing
the destination number to be preset
(valid destination numbers = 0 –
FFF0 ) (The last 15 source and
destination numbers are reserved.)
<Src>
Hexadecimal number specifying the
source to be preset. (valid source
numbers = 0 – FFF0, and the letter X
[used when the specified destination
on the requested level(s) is to be
disconnected]).