NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
27
Chapter 3: Operation
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Operator and All List Parameters
The All List is a long flat list of all the available parameters, arranged
from the most-used to the least-used. It is intended for a “Supervisor”
security designation. The Operator List is a condensed version of the
All List, and is intended for an “Operator” security designation
.
•
The NSM-8×1AES parameters listed on pages
28
–
31
and the
NSM-7×2AES parameters listed on pages
32
–
35
are sorted in the
order that they appear in the Operator and/or All List.
•
Default values are marked with an asterisk (*).
•
Parameters accessed only from within the All List are shaded in
gray.
•
Parameters with the symbol
[RO]
are
read-only.
Read-only
parameter default values are not highlighted, as they report system
status indicators.
•
Information in brackets provides further explanation of a parameter.
This information will not appear on the card edge.
See
“Navigating the Operator and All Lists” on page 26
for instructions
on navigating this list using card-edge controls.
Note
You can reset the default values
for all of the parameters
automatically via the
FctryRcl
parameter.
