NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
65
Appendix B: Resource Module X-Y Network Communication
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Supported Features and X-Y Commands
Router Control Features
The NEO NSM-8×1AES/NSM-7×2AES supports these router control
system features:
•
Crosspoint status
•
Crosspoint control
•
Lock/unlock control and status
•
Protect/unprotect control and status
X-Y Commands for Crosspoint Status
Crosspoint Status
This command is used to requests the crosspoint status of all
destinations on a specified level.
Command
Command syntax is as follows:
@ S?<Lvl>
Expected Response
The system will respond to a Crosspoint Status message for every
destination in the router.
Table B-1. Crosspoint Status
Command Syntax
Command Syntax
Element
Syntax Format Description
Header
@
@ followed by a space ( ) indicates
pass-through commands
Command
S?
Crosspoint Status command
Parameters
<Lvl>
A single digit level number (0–9)
Closing
Carriage return
