NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
73
Appendix B: Resource Module X-Y Network Communication
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Response syntax is as follows:
S:<Lvl><Dest>,<Src>
Examples
Table B-11
shows typical
Buffer Execute
commands and describes the
resulting actions and responses that take place.
Table B-10. Buffer Execute
Response Syntax
Response Syntax
Element
Syntax Format Description
Header
None
Command
S
Crosspoint Status
command
Parameters
<Lvl>
A single digit level number (in hex,
valid level numbers = 0–9, A–F)
representing the level of switching
the destination being statused is on.
<Dest>,
Hexadecimal number representing
the destination number being
statused (valid destination numbers =
0–FFF0)
<Src>
Hexadecimal number specifying
source currently switched to
destination (valid source numbers =
0–FFF0, and the letter X [used when
the specified destination is
disconnected])
Table B-11.
Typical Command Examples
Command Sent
Action
@ P:014/4,1F:1A
Presets the following crosspoints:
Levels 0, 1, and 4
Destination 4
Source 31 (hex. 1F),
Device ID 10 (hex 1A).
