14
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 2: Installation and Removal
Packing List
The NEO NSM-8×1AES/NSM-7×2AES module package includes
these items:
•
One front module
•
One back module
•
One
Installation and Operation Manual
Installing NSM-8×1AES/NSM-7×2AES Modules
This module requires no specialized installation procedures. See the
NEO FR-3901, FR-3903, and FR-3923 Mounting Frames Installation
and Operation Manual
for details about installing NEO modules.
Removing NSM-8×1AES/NSM-7×2AES Modules
This module requires no specialized removal procedures. See the
NEO
FR-3901, FR-3903, and FR-3923 Mounting Frames Installation and
Operation Manual
for details about removing NEO modules.
Upgrading NSM-8×1AES/NSM-7×2AES
Firmware
Firmware upgrading is a routine procedure that you must perform to
install newer versions of software on the NSM-8×1AES/NSM-7×2AES
module. Pilot, Co-Pilot, or Navigator software applications are required
for this procedure. You can use either the Discovery or the
drag-and-drop method. When performing the upgrading procedure,
check the appropriate README file to confirm which files are needed.
Use care to ensure that you upload the correct files to the intended
module.
If for some reason the upgrade fails, the module may not respond to
controls and will appear to be non-functional. In that event, follow the
procedures described in
“Correcting a Failed Upgrading Procedure” on
page 19
.
