72
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Appendix B: Resource Module X-Y Network Communication
Buffer Execute
This command executes all presets. The presets containing pending
crosspoint commands are loaded using the
Crosspoint Preset
command.
Command
Command syntax is as follows:
@ B:E
Expected Response
This command can result in a number of crosspoint status messages as
each crosspoint that has been preset and that is now executed will result
in a status message. The exact number will depend on how many
crosspoints are preset when the
Buffer Execute
command is issued.
Resulting status messages will only be sent by the serial port if
Reporting has been enabled for the serial port.
@ P:012/7,10:IA
Presets the following crosspoints:
Levels 0, 1, and 2
Destination 7
Source 16 (hex. 10)
Device ID 10 (hex A)
@ B:E
Executes all presets; see
“
Buffer Execute
”
for more
details
Table B-8.
Typical Command Examples
(Continued)
Command Sent
Action
Table B-9.
Buffer Execute Command Syntax
Command Syntax
Element
Syntax Format Description
Header
@
@ followed by a space ( ) indicates
pass-through commands
Command
B:E
Buffer
Execute
command
Parameters
None
Closing
Carriage return
