26
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 3: Operation
Navigating the Operator and All Lists
To navigate, then view or change a parameter from the Operator or All
List, follow these steps:
1. Open the front panel of the NEO frame.
2. Press any card edge control button or the toggle switch to turn on
the VFD display.
The message
NSM-8×1AES
(or
NSM-7×2AES
) will appear. (If a
previous user has left the display at a different parameter name,
repeatedly press the
Escape
button until
NSM-8×1AES
[or
NSM-7×2AES
] appears.)
3. Press the
Enter
button.
The name of the first parameter option in the list will appear.
4. Push the
Enter
button again to access the options for the parameter
displayed on the VFD screen.
OR
OR
Press the
Nav +/Nav-
switch down repeatedly to view other
parameters, then press the
Enter
button to access an item’s
parameter value options.
5. Press the
Nav+/Nav-
switch up or down to scroll through the
different selectable parameter value options, then press the
Enter
button to select the value you want.
OR
Press the
Nav+/Nav-
switch up or down to adjust the numerical
parameter value, then press the
Enter
button.
6. Close the front panel of the frame to ensure the cooling system
continues to operate properly.
Note
After several seconds of
non-activity, a scrolling
message will appear, describing
the purpose of the currently
selected parameter.
