66
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Appendix B: Resource Module X-Y Network Communication
Response syntax is as follows:
S:<Lvl><Dest>,<Src>
Examples
Table B-3
shows a typical
Crosspoint Status
command and describes
the resulting action and response that takes place.
X-Y Commands for Crosspoint Control
Crosspoint Take
This command directly takes the specified crosspoint. The command
specifies which inputs to connect to which Destinations and on what
Levels. Several crosspoint takes can be specified on a single command
line. In such cases all specified crosspoints are taken simultaneously.
Table B-2. Crosspoint Status
Response Syntax
Response Syntax
Element
Syntax Format Description
Header
None
Command
S:
Source
command
Parameters
<Lvl>
Level number (0–9, A–F)
<Dest>,
Destination number (0 – FFF0)
<Src>
Source preset (0 – FFF0 or X [which
indicates a disconnect request])
Table B-3.
Typical Command Examples
Command Sent
Action
@ X?0
Request the status of all destinations on Level 0
Response
Description
S:00,16
Source 22 is connected to Destination 0 on Level 0
S:01,16
Source 22 is connected to Destination 1 on Level 0
S:02,16
Source 22 is connected to Destination 2 on Level 0
