Imagine Neo NSM-7x2AES Installation And Operation Manual Download Page 36

Page: 36 / 93

NSM-8×1AES/NSM-7×2AES Installation and Operation Manual

Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.

Chapter 3

Operation

Overview

Installation, navigation, configuration, and setup information is now
included in the

NEO FR-3901, FR-3903, and FR-3923 Mounting

Frames Installation and Operation Manual

. If your current NEO frame

manual is Edition A, B, C, or D, you will need to download an updated
version from our Web site (

www.broadcast.harris.com/leitch

) to access

this information.
The following topics are found in this chapter:
•

“Alarms” on page 37

•

“Cross-Functional Parameter Changes” on page 25

•

“LEDs and Module Indicators” on page 39

•

“Navigating the Operator and All Lists” on page 26

•

“Operation Notes” on page 24

•

“Operator and All List Parameters” on page 27

•

“Setup Parameters” on page 36

•

“State Recovery Parameter Availability” on page 39

Summary of Contents for Neo NSM-7x2AES






























































































Search results

Summary of Contents for Neo NSM-7x2AES

Reviews:

Related manuals for Neo NSM-7x2AES

Brands by name

Popular brands

Imagine Neo NSM-7x2AES, Installation And Operation Manual

Search results

Summary of Contents for Neo NSM-7x2AES

Reviews:

Related manuals for Neo NSM-7x2AES

Brands by name

Popular brands