16
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 2: Installation and Removal
4. Select the files shown in the
Add Upgrade Files
box, and then
click
OK
.
5. Select and delete unwanted files (for example:
vxWorks.lzs
) in the
Add upgrade files for transfer to device:
field by clicking
Remove
.
6. Click
Perform Transfer
and then click
Yes
.
7. Wait for the message
File transfer to device succeeded
.
This may take a moment.
8. Click
Reboot Device
and then click
Yes.
9. Wait 30 seconds, and then close the
Configuration...
box.
The module name appears at the card edge.
Upgrading the Firmware (Drag-and-Drop Method)
Follow these steps to upgrade the firmware using the drag-and-drop
method:
1. Download the appropriate most recent upgrade package from our
Web site or from your CD-ROM, and then unzip the upgrade
package.
2. If the affected module has not been discovered by your CCS
software application, enter the Build mode, and then drag or copy
and paste the module’s device icon from the catalog folder into the
Network
or
Discovery
folder.
3. Right-click the device icon and then select
Properties
.
CAUTION
You must delete unwanted files in the Add upgrade files
for transfer to device: field before transferring the files.
Otherwise, the upgrading procedure will fail.
