NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
17
Chapter 2: Installation and Removal
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
4. On the
NRO
or
Device
tab of the
Navigation Properties
box, enter
the IP address of the frame that holds the module. (See Figure 2-1.)
Figure 2-1.
Navigation Properties Box
5. In the last field, enter the slot number of the module, and then close
the window.
6. Double-click the device icon.
The
Configuration...
window opens. On the
Software Upgrade
tab, the
/slotx/boot
(where x is the slot number) directory appears
in the
Select the device directory to transfer to:
field.
7. Click
Add,
and in the
Add Upgrade Files
box, browse and select
the
boot
folder in the module’s upgrade.
8. Click
OK
.
The
Add Upgrade Files
box appears.
9. Select the file and then click
OK
.
10. Click
Perform Transfer
and then click
Yes
.
This may take several minutes.
CAUTION
Do not make changes in the third field (located above
and to the right of the Set Default button.)
Do not make changes in
this field
Enter frame IP number here
