48
NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Appendix A: Tree View Navigation
Navigating the Tree View
To navigate, then view or change a parameter from the Tree View,
follow these steps:
1. Open the front panel of the NEO frame.
2. Press any card edge control button or the toggle switch to turn on
the VFD display.
The message
NSM-8×1AES
(or
NSM-7×2AES
) will appear as the
banner on the card-edge display screen.
3. Press the
Select
button.
The first two items in the Level One list will appear.
4. Click
Nav-
(down) on the
Nav-/Nav+
switch to view more items in
the list.
5. Choose the desired item in the list, then press the
Select
button.
The Level Two list will appear.
6. Repeat steps 4 and 5 to view more items in Levels Two, Three, and
Four.
7. If the parameter is numeric, slide the bar to the desired parameter
using the
Nav+/Nav-
switch.
OR
Choose the desired item in the Level Four list, then press the
Select
button.
8. Once you have set or viewed the parameter, you can leave it in its
current state or return to the card-edge display banner.
To return to the card-edge display banner, repeatedly press the
Escape
button.
9. Close the front panel of the frame to ensure the cooling system
continues to operate properly.
Note
If you do not wish to make
changes to your settings, return
to the previously selected item
in the list, then press
Escape
to
move up a level.
Note
After several seconds of
inactivity, a scrolling message
will appear, describing the
purpose of the parameter
currently selected.
