![background image](http://html1.mh-extra.com/html/ifm/cr711s/cr711s_original-programming-manual_3891703138.webp)
138
ifm
Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n
2017-12-19
ifm function libraries
Library ifmIOcommon.library
>
Output parameters
23248
Parameter
Data type
Description
Possible values
xError
BOOL
Indication if an error occurred during the FB
execution
FALSE
No error occurred or the FB is
still being executed
TRUE
Error occurred
Action could not be
executed
Note diagnostic
information
eDiagInfo
DIAG_INFO Diagnostic information
→ List below (diagnostic codes:)
xPrepared
BOOL
State of the FB outputs
FALSE
FB outputs still invalid; FB is
still processed
TRUE
FB outputs valid; FB has been
processed
iTemperatureC
INT
Measured temperature in [°C]
e.g. 35
iTemperatureF
INT
Measured temperature in [°F]
e.g. 95
Diagnostic codes (
→
Messages / diagnostic codes of the function blocks
(
STAT_PREPARING
State: FB/FUN is processed; final results are not yet available. Some output values are
updated in each PLC cycle.
STAT_DONE
State: FB/Function has been successfully executed and completed. There are valid
results on the outputs.
ERR_INVALID_VALUE
Error: At least one input parameter is invalid or outside the value range.
ERR_INTERNAL
Error: Internal system error
► Contact the ifm Service Center!
ERR_UNDEFINED
Error: Unknown error
► Contact the ifm Service Center!
DIAG_INTERNAL
Internal system error.
DIAG_INVALID_VALUE
At least one input parameter is invalid or exceeds the permissible area.
>