IFM CR711S, Original Programming Manual

Page: 128 / 205

128
ifm Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n 2017-12-19
ifm function libraries Library ifmIOcommon.library
>
10.5.2 Output
23161
Function block type:
Function block (FB)
Library:
ifmIOcommon.library
Symbol in CODESYS:
>
Description
23206
The FB is used to configure and control a digital or analogue output channel.
>
Input parameters
23162
Parameter
Data type Description Possible values
xResetError
BOOL Reset request for an occurring error FALSE When switching from FALSE

TRUE: Reset request to the
lower level system
TRUE
uiChannel
UINT Output channel Group + channel
→ Data sheet
→
Note on wiring
(
→ p.
29 )
Examples:
703 Group 7 + channel 3
1203 Group 12 + channel 3
eMode
MODE_OUTPUT Operating type of the output channel
→ MODE_OUTPUT (ENUM)
(
→ p.
141 )
eFilter
FILTER_
OUTPUT Filter definition of the output channel
→ FILTER_OUTPUT (ENUM)
(
→ p.
139 )
uiValue
UINT Value that is to be written to the output
In the digital mode or sensor supply
mode; if setting at the eMode input =

OUT_DIGITAL_CSI

OUT_DIGITAL_CSO

OUT_SENSOR_05

OUT_SENSOR_10
FALSE Output deactivated
TRUE
Output activated
In analogue mode; if setting at the
eMode input =

OUT_ANALOGUE_10
Values indicated in [mV]
0...10 000