IFM CR711S, Original Programming Manual

Page: 145 / 205

145
ifm Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n 2017-12-19
ifm function libraries Library ifmOutGroup
>
Diagnostic codes (
→ Messages / diagnostic codes of the function blocks
(
→ p.
180 )):

ERR_INVALID_VALUE Error: At least one input parameter is invalid or outside the value range.

ERR_INTERNAL Error: Internal system error
► Contact the ifm Service Center!

ERR_UNDEFINED Error: Unknown error
► Contact the ifm Service Center!

ERR_STUCK_AT_HIGH Error: Signal frozen, signal state high.

ERR_STUCK_AT_LOW Error: Signal frozen, signal state low.

ERR_UNDERVOLTAGE_VBBX

For inputs: Error: Reference voltage not reached.

For outputs. Error: The voltage of the corresponding output group supply or at
VBB30 / VBB15 is not reached.

ERR_OVERVOLTAGE_VBBX

For inputs: Error: Reference voltage exceeded.

For outputs. Error: Voltage of the corresponding output groups supply or at VBB30
/ VBB15 not reached.

DIAG_INVALID_VALUE At least one input parameter is invalid or exceeds the permissible area.

DIAG_INTERNAL Internal system error.

DIAG_ACCESS FB/Function cannot access the required resource; Resource is blocked by another task.

DIAG_UNDERVOLTAGE_VBBX

For inputs: Error: Reference voltage not reached.

For outputs. Error: The voltage of the corresponding output group supply or at
VBB30 / VBB15 is not reached.

DIAG_OVERVOLTAGE_VBBX

For inputs: Error: Reference voltage exceeded.

For outputs. Error: Voltage of the corresponding output groups supply or at VBB30
/ VBB15 not reached.

DIAG_STUCK_AT_HIGH Error: Signal frozen, signal state high.

DIAG_STUCK_AT_LOW Error: Signal frozen, signal state low.

DIAG_NO_CALIB The selected resource has no valid calibration.
The displayed values are maybe faulty.

DIAG_OVERLOAD_CURRENT Maximum current exceeded.

ERR_OVERLOAD_CURRENT Error: Maximum current exceeded.

DIAG_AT_GROUP_OUTPUT At least one output of the output group is in an error state.

ERR_AT_GROUP_OUTPUT Error: At least one output of the output group is in an error state.
>