ifm
Supplementary device manual Interface CANopen in the AS-i controllerE
Safety instructions
General
10
2
Safety instructions
In this chapter you will find general safety instructions such as:
General rules
Required previous knowledge
Safety instructions for mounting and installation
When are you allowed to use this device and when not?
2.1
General
→ separate basic instructions of the device manual
No characteristics are warranted with the information, notes and examples provided in this manual.
The drawings, representations and examples imply no responsibility for the system and no application-
specific particularities.
The manufacturer of the machine/equipment is responsible for ensuring the safety of the
machine/equipment.
WARNING
Property damage or bodily injury when the notes in this manual are not adhered to!
ifm electronic
assumes no liability for this.
► The acting person must have read and understood the safety instructions and the corresponding
chapters in this manual before working on and with this device.
► The acting person must be authorised to work on the machine/equipment.
2.2
What previous knowledge is required?
This manual is intended for persons with knowledge of control technology and PLC programming with
IEC 61131-3 as well as the CoDeSys® software.
The manual is intended for persons authorised to mount, connect and set up the controllerE according
to the EMC and low voltage directives. The controllers must be installed and put into operation by a
qualified electrician.
In case of malfunctions or uncertainties please contact the manufacturer.
2.3
Functions and features
→ separate basic instructions of the device manual