IEMCA SIR52 MS52 P, Manual For Use And Maintenance

Page: 86 / 212

EN
6 - USE AND OPERATION SIR 52 MS52 P/F
6 - Pag. 14 / 30
6.5 BARS TO BE MACHINED - CHARACTERISTICS AND PREPARATION
CAUTION:
do not feed bars having different sizes than the manufacturer's prescribed sizes.
Table 1. Maximum bar length
Models Version Max. length (mm) Min. length (mm) (*)
33 3300 2500
38 3800 3000
SIR 52-MS52 P
SIR 52-MS52 F
43 4300 3000
INFORMATION:
(*) bars are to be loaded in the middle of the bundle magazine.
(*)To load short bars in the magazine bundle, please refer to IEMCA sales and
customer services in order to verify the possibility of installing a short bar
loading kit.
INFORMATION:
Bar must not present a straightness defect above 0.5 per 1000.
Please find herewith some advice to optimise the bar feeder performances.
Usually barstocks do not need any preliminary operations to be carried out on ends,
nevertheless to obtain the best results when loading them, it is advisable to chamfer them.