IEMCA SIR52 MS52 P, Manual For Use And Maintenance, Page: 165 / 212

10 - DRILLING MACHINE SIR 52 MS52 P/F
EN
10 - Pag. 17 / 20
INFORMATION:
b)to perform the above mentioned step it is necessary to adjust sensors S1.5,
S1.6 and S125.7 (to be done under IEMCA approval only).
b)Hole D=15 mm: Extension KOMET ABS 50-V50 A20 + insert drill KOMET KUB TRIGON V30-
31500 or KOMET KUB QUATTRON U10-71501.
9) Adjust the upward movement of the loading
levers according to the bar diameter to be
loaded, by means of the hand grip on the lever
rod, which can be reached through the front
door of the bar feeder drum and is visible
through the main inspection window.
10)
Shims should be added under the feeding
unit rubber chucks, according to the diameter of
the bar to be loaded hereunder indicated:
- for bars from Ø20 mm up to Ø32 mm add two
shims under each chuck,
- for bars from Ø32 mm up to Ø42 mm add only
one shim under each chuck and replace the
others into their housing,
- for bars from Ø42 mm up to Ø52 mm, no shim
is needed (replace them into their housing).