IEMCA SIR52 MS52 P, Manual For Use And Maintenance

Page: 139 / 212

9 - PART REPLACEMENT SIR 52 MS52 P/F
EN
9 - Pag. 7 / 16
Guide opening sensors
- Replace the sensor (D). Adjust its position so
that it may detect the presence of collar (E).
- Replace sensor (F). Adjust its position so that it
may detect the presence of washer (G).
Guide pre-opening sensor
- This sensor is operated when the equipment is
working in the "Staggered Sprockets Operation
Mode".
- Replace sensor (H). Adjust its position so that it
may detect the presence of groove (L).
9.7 BAR PUSHER BACKWARD LIMIT STOP - REPLACEMENT
- Replace sensor (A).
- Adjust its position, which must be at 0.7 mm
from the end of the truck (B).