![background image](http://html1.mh-extra.com/html/iemca/sir52-ms52-p/sir52-ms52-p_manual-for-use-and-maintenance_3847929066.webp)
EN
5 - ADJUSTMENTS AND SETTING-UP
SIR 52 MS52 P/F
5 - Pag. 16 / 22
5.5
BARSTOCK LENGTH - ADJUSTMENT
To determine the remnant length, adjust the end-
of-bar device in the following way.
-Loosen the knob (A)on the sensor mounting.
-Use the position indicator (B) to shift the
sensor position up to the value corresponding to
the length of the workpiece plus the width of
the cutting tool.
-Tighten the knob (A).
CAUTION:
To avoid damages to the structures,
check block (B) position whenever
changing the lathe collet or the bar
pusher diameter.
INFORMATION:
The max. length allowed for wor width of the cutting tool is 160 mm,
corresponding to position "C". Please contact IEMCA Sales or Service
Department in case a longer length is required.
Summary of Contents for SIR52 MS52 P
