IEMCA SIR52 MS52 P, Manual For Use And Maintenance

Page: 45 / 212

4 - HANDLING AND INSTALLATION SIR 52 MS52 P/F
EN
4 - Pag. 17 / 22
4.4.7 ADJUSTMENT OF BAR END DEVICE ZERO POSITION
- Press button to move the bar pusher
forward until it reaches the lathe collet.
- Loosen the bar end sensor (D) adjustment knob
(B).
- Loosen the screws (C)securing the "ZERO"
backing plate.
- Move the bar end sensor (D) towards the chain
sprocket until it reaches the chain outer
position.
- Tighten the knob (B) to maintain the position of
the sensor.
- Move the "ZERO" backing plate as close as
possible to the sensor bracket.
- Tighten the screw (C) securing the "ZERO"
backing plate.