IEMCA SIR52 MS52 P, Manual For Use And Maintenance

Page: 78 / 212

EN
6 - USE AND OPERATION SIR 52 MS52 P/F
6 - Pag. 6 / 30
DISPLAY CONTROLS AND LEDS
1 Key for numerical value 1.
2 Key for numerical value 2.
3 Key for numerical value 3 and to access the date and hour programming mode
4 Key for numerical value 4.
5 Key for numerical value 5.
6 Key for numerical value 6 and to enter the password entry mode for protected parameters.
7 Key for numerical value 7.
8 Key for numerical value 8.
9 Key for numerical value 9.
10 Key for numerical value 0 or to recall selection cursor.
11 Key for "minus" or "plus" sign.
12 Key for "comma" sign.
13 Key for "CLEAR" function:
• to stop selection function,
• to return to the value which had been displayed before the non-confirmed modification,
• to return to the page shown after setting date and time.
14 Key for "ENTER" function to confirm entered data.
15 Key to recall previous page or to move selection cursor to the left.
16 Key to recall following page or to move selection cursor to the right.
17 Key to scroll page upwards or to move selection cursor upwards or to increase by one the
value in the date and hour programming mode.
18 Key to scroll page downwards or to move selection cursor downwards or to decrease by one
the value in the date and hour programming mode.
19 Red LED:
OFF mode - indicates that there is no signal on the display;
ON mode - indicates that there is a signal on the display.
20 Green LED:
BLINK mode - signals that the display does not interact with the PLC correctly;
ON mode - signals that the display interacts with the PLC correctly.