IEMCA SIR52 MS52 P, Manual For Use And Maintenance

Page: 60 / 212

EN
5 - ADJUSTMENTS AND SETTING-UP SIR 52 MS52 P/F
5 - Pag. 10 / 22
EXAMPLE (SPROCKET Ø19(d) - Ø33 (c) - Ø43 (b) - Ø53 (a)), to
machine ø36 bars using a ø42 bar-pusher:
-
In "Staggered Sprockets Working Mode" the guide
channel must be set to an intermediate position between "c"
and "d" (that is to say that the sprocket edges create a channel
of approximately Ø36, see fig.0031), setting pin (B) to position
1• (see fig.52006100109).
CAUTION:
In staggered sprockets mode, do not use collets with slots that could cause
accelerated wear of the sprockets IEMCA 600P. type collets.