IEMCA SIR52 MS52 P, Manual For Use And Maintenance

Page: 108 / 212

EN
7 - BAR FEEDER MAINTENANCE SIR 52 MS52 P/F
7 - Pag. 6 / 20
7.2.4 SIR52-MS52 P torque limiter - Adjustment
The bar lifting device is equipped with a torque
limiter which actuates should the device fail to work
properly.
To adjust it:
- The magazine must be completely loaded (§.
6.7.) with barstock of the max. diameter.
- Loosen the nuts of sensor (A) in order to remove
it from disk (B).
- Disassemble the disk by loosening screw(C).
- Loosen screw (D).
- Completely loosen ring nut (E). When the bar
feeder is started, the torque limiter slides.
- Stop the bar feeder and tighten ring nut (E) step
by step, making attempts up to the bar lifting
device is restored.
- Tighten screw (D).
- Reassemble the disk and the sensor.