IDEC MICROSmart FC6A Series, User Manual

Page: 43 / 578

FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 2-13
2: P
RODUCT
S
PECIFICATIONS
Self-diagnostic Functions
Input Filter
0 ms (no filter), 3 to 15 ms selectable (in 1 ms increments)
Catch Input/Interrupt Input
High-speed Counter
Pulse Output (Transistor Output Type Only)
Function Switch
Run/Stop Methods
 Keep data

User program (ROM) CRC check
 Timer/counter preset value change check

User program syntax check
 User program execution check

Watchdog timer check
 User program download check
 Power failure

Clock error
 Data link connection check

Expansion bus initialization check
 System check

SD memory card transfer check
 SD memory card access check
High-speed 4 Points (I0, I1, I6, I7)
Minimum turn on pulse width: 5 μ s
Minimum turn off pulse width: 5 μ s
Medium-speed 2 Points (I3, I4)
Minimum turn on pulse width: 35 μ s
Minimum turn off pulse width: 35 μ s
Maximum Counter
Frequency and Points
Single-phase, two-phase common: 100 kHz (single-phase 4 points max, two-phase 2 points max)
Single-phase dedicated: 5 kHz (2 points)
Count Range
Single-phase, two-phase common: 0 to 4,294,967,295 (32 bits)
Single-phase dedicated: 0 to 4,294,967,295 (32 bits)
Operation Mode Rotary encoder mode, adding counter mode, frequency measurement mode
Part No.
FC6A-C16K1CE
FC6A-C16P1CE FC6A-C24K1CE
FC6A-C24P1CE
FC6A-C40K1CE
FC6A-C40P1CE
FC6A-C40K1DE
FC6A-C40P1DE
FC6A-C40K1CEJ
FC6A-C40P1CEJ
FC6A-C40K1DEJ
FC6A-C40P1DEJ
Points 4
Maximum output
pulse frequency
Q0,Q1: 100kHz
Q2,Q3: 5kHz
Q0,Q2,Q4,Q6: 100kHz
Reversible control
Single-pulse output mode: 2axis (Q0-Q3)
Dual-pulse output mode: 1axis (Q0-Q1) Single-pulse output mode: 4axis (Q0-Q7)
Dual-pulse output mode: 4axis (Q0-Q7)
PWM output
Duty cycle: 0.1 to 100.0 (increments of 0.1%)
Output pulse frequency: 15 to 5,000 (increments of 1Hz)
: 4 points(Q0-Q3)
*Q0,Q1:Adjust min. 5
μ s as ON time, and min. 15 μ s as OFF time.
*Q2,Q3:Adjust min. 100 μ s as ON/OFF time .
Duty cycle: 0.1 to 100.0 (increments of 0.1%)
Output pulse frequency: 15 to 5,000
(increments of 1Hz)
: 4 points(Q0,Q2,Q4,Q6)
*Adjust min. 5
μ s as ON time, and min. 15 μ s
as OFF time.
Points 1 (2 position slide switch)
Function
Program run/stop
The function can be set in the function area settings (default setting: enabled).
 Power on/off

WindLDR RUN/STOP command
 Function switch operation
 Special internal relay (M8000) operation

Operation of stop input and reset input