IDEC MICROSmart FC6A Series, User Manual

Page: 125 / 578

FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 2-95
2: P
RODUCT
S
PECIFICATIONS
PID Module
The PID module performs control actions to eliminate the deviation between the set point (SP) and process variable (PV). The PID
module, which is an expansion module, is required to connect to the CPU module for use. Depending on the difference of output
specifications, the PID modules are categorized into two types.
The input channel can accept voltage, current, thermocouple or resistance thermometer signals. The output channel generates
relay output, non-contact voltage (for SSR drive), or current signals.
To configure the PID modules, the Expansion Modules Configuration dialog box in WindLDR is used. For detailed configuration
methods, see "Module Configuration Editor" on page 12-1. For details on the PID module parameter settings, see the "FC6A Series
MICROSmart PID Module User's Manual".
Parts Description
The content in brackets is the LED indicator name on the PID module.
LED Indicators
(1) Type Label
Indicates the PID module type no. and specifications.
(2) Power LED [PWR]
On: Power normally supplied
Flashing: When there is an external power supply (24V DC) fault
Off: Power is not supplied
(2) Power LED [PWR]
(3) Control Output LEDs [OUT0, OUT1]
(4) Event Output LEDs [EVT0, EVT1]
(5) Auto Tuning/auto Reset LEDs [AT0, AT1]
(6) Manual Mode LEDs [MT0, MT1]
(7) Fixed Value Control Mode/program Control Mode LEDs [F/P0, F/P1]
(8) Program Control Execution/hold LEDs [R/H0, R/H1]
(9) External SP Enabled/disabled LEDs [R/L]
(12) Expansion Connector
(12) Expansion Connector
(1) Type Label
(11) Cable Terminals
(11) Cable Terminals
(10) Terminal Name Labels
Example: FC6A-F2M1
OUT0
EVT0
AT0
MT0
F/P0
R/H0
R/L
OUT1
EVT1
AT1
MT1
F/P1
R/H1
PWR
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(3)
(4)
(5)
(6)
(7)
(8)