IDEC MICROSmart FC6A Series, User Manual

Page: 352 / 578

6: D
EVICES
6-30 FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722
■
D8037: Number of Connected Expansion Modules
The number of expansion modules connected to the CPU module (I/O modules, PID modules, and communication modules) is
written to this register.
■
D8052: J1939 Communication Error Code
When an error occurs in J1939 communication, the error code is written to this register. For details on J1939 communication
error codes, see Chapter 8 "J1939 Communication Error Code (D8052)" in the "FC6A Series MICROSmart Communication
Manual".
■
D8056: Battery Voltage
The measurement result of the backup battery voltage is written to this register in 1 mV units.
0: Measurement error
■
D8057: Analog Volume (AI0)
The analog volume value is converted to a digital value and written to this register. For details, see "Analog Potentiometer" on
page 5-46.
■
D8058: Built-in Analog Input (AI1)
The analog input's analog value (0 to 10V DC) is converted to a digital value and written to this register. For details, see "Analog
Voltage Input" on page 5-44.
■
D8059: Analog Input Status AI0
The analog volume's analog input status is written to this register. For details, see "Analog Potentiometer" on page 5-46.
■
D8060: Analog Input Status AI1
The analog input's analog input status is written to this register. For details, see "Analog Voltage Input" on page 5-44.
■
D8067: Backlight ON Time
The backlight on time for the HMI module is written to this register. The backlight on time can be set by modifying the value of
D8067 in a range between 1 and 65,535 s. When D8067 is 0 s, the backlight is always on. The backlight on time can also be
changed with the HMI environment settings. For details, see "Setting the LCD Backlight ON Time" on page 7-13.
■
D8069 to D8099: Slave (1 to 31) Communication Status/Error
Special data registers used in data link communication. For details, see Chapter 7 "Master Station" in the "FC6A Series
MICROSmart Communication Manual".
■
D8040 to D8045, D8100, D8102, D8103, D8735 to D8758: Slave Number (Port 1 to 33)
The slave number is written to these registers when the Port 1 to 33 communication mode is maintenance communication,
Modbus RTU slave, or data link communication. The slave number can be changed by changing the value of the corresponding
device in
Function Area Settings .
For details on communication modes, see the following in the "FC6A Series MICROSmart Communication Manual".

Maintenance communication: Chapter 4 "Maintenance Communication"

Modbus RTU slave: Chapter 6 "Modbus Communication"

Data link communication: Chapter 7 "Data Link Communication"
D8100 = Port 1 Slave No.
D8102 = Port 2 Slave No.
D8103 = Port 3 Slave No.
D8040
= Port 4 Slave No.
D8041
= Port 5 Slave No.
D8042
= Port 6 Slave No.
D8043 = Port 7 Slave No.
D8044
= Port 8 Slave No.
D8045
= Port 9 Slave No.
D8735
= Port 10 Slave No.
D8736 = Port 11 Slave No.
D8737
= Port 12 Slave No.
D8738
= Port 13 Slave No.
D8739
= Port 14 Slave No.
D8740 = Port 15 Slave No.
D8741
= Port 16 Slave No.
D8742 = Port 17 Slave No.
D8743 = Port 18 Slave No.
D8744 = Port 19 Slave No.
D8745 = Port 20 Slave No.
D8746 = Port 21 Slave No.
D8747 = Port 22 Slave No.
D8748 = Port 23 Slave No.
D8749 = Port 24 Slave No.
D8750 = Port 25 Slave No.
D8751 = Port 26 Slave No.
D8752 = Port 27 Slave No.
D8753 = Port 28 Slave No.
D8754 = Port 29 Slave No.
D8755 = Port 30 Slave No.
D8756 = Port 31 Slave No.
D8757 = Port 32 Slave No.
D8758 = Port 33 Slave No.