IDEC MICROSmart FC6A Series, User Manual

Page: 79 / 578

FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 2-49
2: P
RODUCT
S
PECIFICATIONS
Transistor Protection Source Output Specifications
■
24V DC Power Type
Output Internal Circuit
(The overcurrent detection circuit has been omitted.)
Type No. FC6A-D16P1CEE FC6A-D32P3CEE
Output Points 8 16
Output Points per Common Line 8 16
Rated Load Voltage 24V DC
Operating Load Voltage Range 20.4 to 28.8V DC
Terminal Arrangement See "24V DC Power Type" on page 2-51.
Maximum Load Current
1 0.5 A maximum 0.1 A maximum
1 Common 4 A maximum 1.6 A maximum
Voltage Drop (ON Voltage) 1 V or less, voltage between COM and output terminal when ON
Maximum Inrush Current 1 A 0.2 A
Leakage Current 0.1 mA maximum
Clamping Voltage 39 V±1 V
Maximum Lamp Load 12 W 2.4 W
Inductive Load L/R = 10 ms (28.8V DC, 1 Hz)
External Current Draw 100 mA maximum, 24V DC (-V terminal supply power)
Output Protection Functions
Overcurrent protection function (not a thermal shutdown function).
Overcurrent detected with 4 outputs as 1 group. (Group 1: Q0 to Q3, Group 2: Q4 to
Q7, Group 3: Q10 to Q13, Group 4: Q14 to Q17)
When overcurrent is detected, the 4 outputs in the corresponding group are turned
off for a fixed period (1 s). When overcurrent is detected, a special internal relay
turns on (M8172 to M8175) and the error LED [ERR] turns on.
Output Current Limit Value 1.0 to 2.0 A 0.2 to 0.3 A
Isolation
Between Output
Terminal and
Internal Circuit
Photocoupler isolated
Between Output
Terminals
Not isolated
I/O Terminal Connector
Type See "24V DC Power Type" on page 2-51.
Insertion/Removal
Durability
100 times minimum
Output Delay
Turn ON Time Q0 to Q7: 5 μ s or less
Q0 to Q7: 5 μ s or less
Q10 to Q17: 300 μ s or less
Turn OFF Time Q0 to Q7: 5 μ s or less
Q0 to Q7: 5 μ s or less
Q10 to Q17: 300 μ s or less
V (-)
Output
COM (+)
Internal Circuit