IDEC FS1A-C11S, User Manual

Page: 387 / 398

TROUBLE SHOOTING
6-1
C
h
a
p
te
r 6
Chapter6 TROUBLE SHOOTING
This chapter describes how to determine the cause of a failure or error that occurs with the
SafetyOne or connected device, and the measures to take to solve the problem.
Error descriptions and troubleshooting
The SafetyOne uses advanced diagnostic functions to detect any problems within the SafetyOne
and its peripheral devices, thereby ensuring safety performance of the entire system. You can
obtain information about a detected failure or error by using the error LED display, input LEDs,
and monitor outputs.
Error information from error LED display and monitor outputs
Error
LED Monitor output Description Cause Possible solution
Y14 Y15 Y16
- OFF OFF ON Normal operation - -
1 OFF ON OFF Input monitor error 1. Fault in the
dual channel
input
2. Fault in the
muting input
3. Both inputs of
the mode
selector inputs
are ON
4. EDM input is
OFF 1. Check the
corresponding dual
channel input device and
wiring.
2. Check the
corresponding muting
input device and wiring.
3. Check the mode
selecting device and
wiring.
4. Check the
corresponding external
device and wiring.
2
ON OFF OFF Fault in safety input
wiring or safety input
circuit
1. Broken or
shorted safety
input wiring
2. Fault in safety
input device 1. Check safety input
wiring.
2. Check operation the
safety input device.
3
ON OFF OFF Fault in start input
wiring or start input
circuit
1. Shorted start
input wiring
2. Fault in start
input device 1. Check start input
wiring.
2. Check operation of the
start input device.
4
ON OFF OFF Fault in safety output
wiring or safety
output circuit
1. Shorted safety
output wiring
2. Fault in safety
output device 1. Check safety output
wiring.
2. Check operation of
safety output device.