![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581094.webp)
9
BIIS 1200 SYSTEM OPERATION
9-3
Transmitting a call
D
Transmitting an Individual call
(Menu > Signaling/Call >
Call List Select
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select
“Signaling/Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Call List Select,” then push [OK]�
Call List Select
►
Call Menu
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select an
Individual ID�
✔
Station 1
✔
Group 1
Call List Select
5� Push [PTT] to transmit the Individual call�
• “Connect” is displayed when an acknowledgment is
received from the targeted station�
• “Failed” is displayed if an acknowledgment is not
received from the targeted station�
6� After “Connect” is displayed, hold down [PTT] to
speak�
7� Release [PTT] to receive�
8� After the communication is finished, push [Back]
to send a Clear down signal to terminate the
connection�
TIP:
•Push [Call List Select] to directly display the “Call
List Select” screen in step 4 above�
•You can also select the Individual ID in the
“Individual Select” screen�
(Menu > Signaling/Call >
INDIV Select
)
•Push [Individual] to directly display the “Individual
Select” screen�
D
Transmitting a Group call
(Menu > Signaling/Call >
Call List Select
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select
“Signaling/Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Call List Select,” then push [OK]�
Call List Select
►
Call Menu
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select a Group
ID�
✔
Station 1
✔
Group 1
Call List Select
5� Push [PTT] to transmit the Group call�
6� Release [PTT] to receive�
7� After the communication is finished, push [Back]
to send a Clear down signal to terminate the
connection�
TIP:
•Push [Call List Select] to directly display the “Call
List Select” screen in step 4 above�
•You can also select the Group ID in the “Group
Select” screen�
(Menu > Signaling/Call >
Group Select
)
•Push [Group] to directly display the “Group Select”
screen�