![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581100.webp)
9
BIIS 1200 SYSTEM OPERATION
9-9
Incoming list
The transceiver saves a log of the received Individual
calls, Group calls, Status Messages, Messages and
Emergency calls in the memory, depending on the
presetting�
Up to 10 Status/Message/Emergency or 5 Voice calls
can be saved in the log, and the oldest call record is
deleted when an 11th (Status/Message) or 6th (Voice)
call is received� However, once the transceiver is
turned OFF, the all records are deleted�
D
Displaying the Incoming list
(Menu > Signaling/Call >
Incoming
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select
“Incoming,” then push [OK]�
Group Select
►
Incoming
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select
“Voice” or “Message/Status,” then push [OK]�
Voice
►
Message/Status
►
Signaling/Call
•Voice:
The received Individual or
Group call entries are saved in
the log�
•Message/Status: The received Status Message
and Message entries are
saved in the log�
When “Voice” is selected in step 4:
The “Voice” screen is displayed�
Station 1
Station 3
Voice
TIP:
Skip step 5 and go to step 6�
When “Message/Status” is selected in step 4:
The “Message/Status” screen is displayed�
Station 2
►
Station 4
►
Message/Status
5� Push [P2 (Up)] or [P1 (Down)] to select the log,
then push [OK]�
• The Message content is displayed�
Go to Area 2 after you
finish your task. I have
made about half of
Message Display
6� Hold down [Back] for 1 second to return to the
standby screen�