![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581073.webp)
7
NXDN™ OPERATION
7-13
D
Receiving a Stun, Kill or Revive
If a Stun or Kill command is received, the transceiver
will display “Deactivated” and you cannot receive or
transmit.*
Deactivated
If a Stun command is received, you cannot operate
the transceiver until a Revive command is received, or
the password is input�
If a Kill command is received, you cannot operate the
transceiver until it is reprogrammed�
NOTE:
Depending on the presetting, the transceiver
can ignore the Stun, Revive and Kill commands that
are from a non-specified station.
* Depending on the presetting, reception may be enabled.
D
Receiving an Emergency call
When an Emergency call is received:
•Beeps sound�
• “RX Emergency” and the calling station name (or ID)
are alternately displayed�
•“
” blinks�
RX Status 01
Call
Scan
• When the Send Ack function is set to ON by
presetting, the transceiver automatically transmits an
acknowledgment to the calling station, if the received
call type is a Group or All call�
L
If the received call type is Individual, and it requests
an acknowledgment be sent back, the transceiver
automatically sends the acknowledgment�
1� Hold down [PTT] to speak�
2� Turn OFF the transceiver, change the channel, or
push [PTT] or a key to stop the beep and display
indication�
Receiving a call