![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581040.webp)
5
SCAN OPERATION
5-2
A Scan checks for signals on each channel and stops
when a signal is received�
NOTE:
Two or more channels must be preset to start
a Scan�
(Menu > Channel/Scan >
Scan ON/OFF
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Channel/
Scan,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Scan ON/
OFF,” then push [OK]�
Scan List
►
Scan ON/OFF
►
Channel/Scan
4� Push [Up] or [Down] to select “ON,” then push
[OK]�
✔
OFF
✔
ON
Scan ON/OFF
SCAN ON/OFF
ON
•The Scan starts�
•“Scan ON/OFF ON” is briefly displayed.
L
When a signal is detected, the Scan pauses on the
channel until the signal disappears, then the Scan
resumes�
5� Hold down [Back] for 1 second to return to the
standby screen�
• “
” blinks while scanning� (Depending on the
transceiver version�)
Starting a Scan