![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581097.webp)
9
BIIS 1200 SYSTEM OPERATION
9-6
Transmitting a call
D
Directly entering Message
You can directly enter a Message, then send it to the
target station or group�
(Menu > Signaling/Call >
Write Message
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Write
Message,” then push [OK]�
Status
►
Write Message
►
Signaling/Call
4� Enter a Message of up to 100 characters�
Write Message
Information
L
• To enter the character, rotate [Rotary Encoder] and
push [P2 (Up)]�
Usable characters: a ~ z, A ~ Z, 0 ~ 9,
/ + – = \ . ! ? ʼ , * # ”
•To move the cursor, push [P2 (Up)] or [P1 (Down)]�
•To insert a space, push [P2 (Up)] twice�
•To delete, push [Back]�
5� After entering, push [PTT] to send it�
Go to Area
2
Write Message
• “Success” is displayed when an acknowledgment is
received from the targeted station�
• “Failed” is displayed if an acknowledgment is not
received from the targeted station�
TIP:
• The entered Message can be temporary saved�
After entering a Message in step 5, push [OK] to
display “Save Msg?�” Push [P2 (Up)] or
[P1 (Down)] to select “Yes,” then push [OK] to
save� However, once the transceiver is turned
OFF, the saved Message is deleted�
R
Save Msg?
No
Yes
• Push [Write Message] to directly display the “Write
Message” screen in step 4 to the left�