7
NXDN™ OPERATION
7-21
The Over The Air Programming (OTAP) function
enables wireless programming using a transceiver�
Up until now, you needed programming software, a
PC, and a data cable to program transceivers� As the
number of transceivers in a system increased, the
programming cost was higher and it took more time
to program�
This function provides easier and faster programming,
and lowers the cost�
TIP:
See the optional CS-OTPM1
otap
manager
software
Help file or its instruction manual for
details�
NOTE:
When using the OTAP function, the following
settings are required in the optional CS-F52D
programming
software
�
For the OTAP Management transceiver:
•Set
Connection Speed
to “19200�”
• Set
Mode
to “PC CMD V2�”
( Common > External I/O > Port Setting >
Multi-Connector
)
For the SU:
Set
OTAP Accept
to “ON�”
(Digital > OTAP > OTAP Setting >
OTAP Accept
)
PC
(The CS-OTPM1
is installed)
OTAP Management
Transceiver
Repeater
Internet
L
You can also remotely program through repeaters
or the Internet�
ICF file
OTAP
data
SU
SU
SU
* SU= Subscriber Unit
Over The Air Programming (OTAP) function
