![background image](http://html2.mh-extra.com/html/icom/ic-f62d/ic-f62d_operating-manual_4278581063.webp)
7
NXDN™ OPERATION
7-3
D
Transmitting an Individual call
(Menu > Signaling/Call >
Call List Select
)
1� Push [Menu] to display the Menu screen�
2� Push [P2 (Up)] or [P1 (Down)] to select “Signaling/
Call,” then push [OK]�
Channel/Scan
►
Signaling/Call
►
Menu
3� Push [P2 (Up)] or [P1 (Down)] to select “Call List
Select,” then push [OK]�
Call List Select
►
Call Menu
►
Signaling/Call
4� Push [P2 (Up)] or [P1 (Down)] to select the
Individual station�
✔
Station 1
✔
Group 1
Call List Select
5� Push [PTT] to transmit an Individual call�
6� Hold down [PTT] to speak�
7� Release [PTT] to receive�
TIP:
•You can also select the Individual station in the
“Individual Select” screen�
(Menu > Signaling/Call >
INDIV Select
)
•You can also transmit an Individual call through the
Call Menu�
(Menu > Signaling/Call >
Call menu
)
• When an Individual ID is set in the Memory CH,
you can transmit the Individual call by pushing
[PTT] on the channel�
•Push [Call List Select] to directly display the “Call
List Select” screen in step 4 to the left�
NXDN operation enables you to make a call to a
specific station (Individual call) or to a particular group
(Group call)� Other digital mode transceivers on the
channel will not receive a call that does not match
their Individual or Group ID and/or Radio Access
Number (RAN) code�
NOTE:
When the handshake (repeater access) fails
within the specified time period after pushing [PTT],
the transceiver starts roaming�
Transmitting a call