6
MENU SCREEN
6-9
Call List Select
Selects a calling destination� After selecting, push
[PTT] to transmit the voice call to the selected
destination� (pp� 3-9, 7-3, 7-4, 9-3)
Call Menu
In the Analog mode
Selects a calling destination and a call type (Call
Alert, Radio Check, Stun, Revive, and Sel Call)�
After selecting, push [PTT] to transmit the call to the
selected destination� (pp� 8-4 ~ 8-6, 9-4, 9-5)
In the Digital mode
Selects a calling destination and a call type (Status,
Message, Write Message, Call Alert, Remote Monitor,
Radio Check, Stun, Revive, and Kill)� After selecting,
push [PTT] to transmit the call to the selected
destination� (pp� 7-5 ~ 7-10)
NOTE:
When the call type is “Status,” “Message,”
or “Write Message,” you can select or directly enter
a message before transmitting it� After selecting or
entering a message, push [PTT] to transmit it� See
pages 7-5 ~ 7-7 for details�
Clear Incoming
Clears the received call log from the Incoming list�
(pp� 7-18, 9-10)
Clear Outgoing
In the Digital mode
Clears the transmit call log from the Outgoing list�
(p� 7-19)
DTMF Autodial
Displays the “DTMF Autodial” screen� Then, push
[P2 (Up)] or [P1 (Down)] to select a DTMF code� After
selecting, push [PTT] to transmit the selected DTMF
code�
Group Select
Displays the “Group Select” screen� Then, push
[P2 (Up)] or [P1 (Down)] to select a Group ID from
the Call List� After selecting, push [PTT] to transmit a
Group call�
Incoming
Displays a log of the received Individual call, Call Alert
call, Status message, and Message� (pp� 7-17, 8-10,
9-9)
INDIV Select
Displays the “Individual Select” screen� Then, push
[P2 (Up)] or [P1 (Down)] to select a Individual ID from
the Call List� After selecting, push [PTT] to send a
Individual call�
Message
Displays the “Message” screen� Then, push [P2 (Up)]
or [P1 (Down)] to select a message� After selecting,
push [PTT] to send the Message to the currently
selected destination� (pp� 7-6, 8-7, 9-5)
Outgoing
In the Digital mode
Displays a log of the transmitted Individual calls and
Call Alert calls� (p� 7-19)
Status
Displays the “Status” screen� Then, push [P2 (Up)]
or [P1 (Down)] to select a status message� After
selecting, push [PTT] to send the message to the
currently selected destination� (pp� 7-5, 8-6, 9-4)
Write Message
Enables the user to directly enter a message� After
entering, push [PTT] to transmit it� (pp� 7-7, 9-6)
Signaling/Call
